Getig 9311 is our cadmium free silver brazing rod for similar and dissimilar joining steel, stainless steel, nickel and nickel alloys, copper and copper alloys. Getig 9311 is mainly used for production brazing. Typical applications include household articles, cool aggregates, distilling plants, winepress equipment, dishes and jewellery. Getig 9311 has good flowing characteristics, is standard available as bare rod which is used in combination with silver solder brazing flux.
|Ult. Tensile Strength N/mm2||Elongation (%)(L=5D)||Melting Range|
Clean the soldering zone. Apply silver brazing flux. Bigger work pieces must be preheated right through over a wide area, until the flux runs like water. Place the rod on the joint and melt off a small drop, which is then spread out or drawn along with the flame.
Flame adjustment: Neutral
Diameters(mm): 1.20, 1.6, 2.0, 2.5, 3.20, 4.0.