GETIG 309L

IDENTIFICATION : ER 309L

SPECIFICATION : AWS A 5.9 ER309L BS2901-90 309S92 DIN 8556-86 WSGX2CrNi 24.12

CHARACTERISTICS:

Solid wire deposits a 24 % Cr / 13 % Ni austenitic stainless steel weld metal with a ferrite content about FN 12. The high alloy level and high ferrite content enables the weld metal to tolerate dilution from carbon and low alloy steels without hot cracking. Deposited weld metal is of radiographic quality.

APPLICATIONS :

Buffer layer on mild steel or low alloy steels. Joining of clad steels and dissimilar joints between stainless and mild or low alloy steels. Joining of ferrite – martensitic stainless steels. Welding of similar composition, 309 type stainless steel. Joining type 304/304L, 347, 321, 316/316L and duplex stainless steel to mild and low alloy steels.

SHIELDING GAS : Argon 99.99% 6-12 l/min.

FERRITE CONTENT IN THE WELD METAL : 8 – 16 FN.

WELDING CURRENT : DC ( - )

CORROSION RESISTANCE : Good resistance to general and intergranular corrosion. Also good resistance to oxidising acids and cold reducing acids.

COMPOSITION OF THE WIRE (RANGE) %:

C Mn Si Cr Cu Ni Mo S P
0.03 max 1.0- 2.50 0.30-0.65 23.0 – 25.0 0.50 max 12–14 0.50 max 0.03 max 0.03 max

MECHANICAL PROPERTIES (RANGE) :

Tensile Strength N/mm2 Yield Stress N/mm2 Elongation % (L=4D) Charpy V-notch impact value in joules
540 – 650 380–480 35 – 45 Temp Joules
0°C 50 - 100

RECOMMENDED CURRENT AND PACKING DATA :

SIZE (mm) LENGTH (mm) PACKING PER BOX
1.6 1000 5Kg
2.0 1000 5Kg
2.5 1000 5Kg
3.15 1000 5Kg

Approved By :